Two speed induction motor.
Parallel rocker arm system can effectively absorb stresses to avoid blade breakage.
Specially designed blade holders adapts pin end blade & plain end blade and assure you easy blade replacement.
Arm cover protects operator from being hit by upper rocker arm.
Highly tensioned blade can perform precise cuts requiring no sanding or relief cuts.
    
          
    Max. thickness of cut

2" (51mm) at 90º

1" (25mm) at 45º
Throat 16" (406mm)
Blade length  

5" (127mm) pin end               

5" (127mm) plain end
Stroke 3/4" (19mm)
Motor      1/20 HP (Low) & 1/10 HP (Hight)
Speed

50HZ 740 rpm & 1450 rpm

60HZ 890 rpm & 1720 rpm
Table size      ø10"¡Ñ17"' (ø254¡Ñ430 mm)
Table tilt 0º to 45º left
Base size        

15-7/8"¡Ñ8-5/8" (402¡Ñ218 mm)  

Overall size

(L¡ÑW¡ÑH)

19-5/8"¡Ñ10-5/8"¡Ñ11-7/16"

(500¡Ñ270¡Ñ290 mm)
Net/Gross Wt.     20/22 kgs
Packaging size 2.11 cuft

 
  
Web Designer :Stan_Wu